2 Megapixel IP Outdoor Dome Camera H.264 / Day & Night / WDR / Low Light
GenuCam's GC202011 is a high performance Fixed Network Camera which is equipped with a 2.0 megapixel CMOS sensor and a resolution of up to 1920x1080.
2.0 Megapixel The GC202011 offers to show you video feed with a large field of high resolutions at 2.0 megapixels that provide you with clear images in great detail.
SPECIFICATIONS
Camera
• Image sensor: 1/2.7" OmniVision 2M CMOS sensor. •
Lens: CS-mount. • Minimum illumination: Color: 0.2 Lux @ F1.2.; B/W: 0.01
[email protected] • IR cut filter. • Day & Night: Auto/ Day/ Night/ Schedule.
Image
•
Video Compression: H.264 / MPEG4 / MJPEG.
• Resolution: -Aspect ratio: "4:3":
1440x1080, 1280x960, 1024x768, 800x600, 640x480, 480x360, 320x240, 176x144. "16:9":
1920x1080, 1280x720, 800x450, 640x360, 480x270, 320x176, 176x144.
• Video
streaming: - Simultaneous H.264, MPEG4, MJPEG. - Multi-profile: resolution / compression /
frame rate / video quality. • Profiles: 3. • Frame rate: NTSC: Maximum 30FPS
(1920x1080). PAL: Maximum 25FPS (1920x1080).
• Image settings: -AGC, Exposure
Time, Mirror, Flip, White Balance, Brightness, Contrast, Saturation, Sharpness, Privacy
masks.
• Exposure Mode: - Indoor, Outdoor, Night, Low-Noise, Moving, Customize
1-3, Schedule.
• Video management software: SDK, including HTTP-API /ActiveX /
ONVIF.
Audio
•Audio streaming: Two-way. •Audio bit rate: G.711u 64kbps /
G.726 32kbps. • S/N ratio: More than 58dB.
• Inputs / outputs: 1 x input / 1
x output(3.5mm earphone jack).
*Design and specifications are subject to change without
notice.
Network
• Security: Multi-level password protections, IP address
filtering, HTTPS encryption, User access log.
• Protocols: IPv4, HTTPS, HTTP, TCP,
UDP, RTP/RTCP/ RTSP, DHCP, NTP, FTP, SMTP, UPnP, ICMP, ARP, DDNS, PPPoE, SAMBA.
•
Users: Access by 10 simultaneous users. • Firmware update: SD card / HTTP. Alar •
Recording: SD card, SAMBA, FTP. • Pre-alarm recording. • Advanced motion: (512
zones, Sensitivity: 0-100 %).
• Trigger: Motion detection, Schedule,Alarm input,
Ethernet loss, Network/Remote digital alarm input. • Notification: SD card recording,
SMTP, FTP, HTTP, alarm output.
Connectors
• RJ-45: 10BASE-T/100BASE-TX.
•
GPIO: Push-in: 1 x alarm input / 1 x alarm output / 1 x DC output(DC 12V) / 1 x Ground / 2 x
RS-485.
• Earphone jack : 2 x 3.5 mm(1 xAudio in [mic. in / line in], 1 xAudio
out). • DIP Switch: 1. AES / 2. DC iris / 3. DHCP / 4.Static IP. • Iris: DC
IRIS. • Reset: Reset for factory default. • Local storage device: SD / SDHC card
slot.
• LED indicators: Power / Network / SD card.
• Power: - DC 12V (DC
power jack) Approx. 4.8 W. -AC 24V (2pin terminal block)Approx. 6 W. - PoE: Approx. 6 W,
IEEE 802.3af compliant class 2.
• Power consumption: 6W. • Processors:
TMS320DM368. • OS: Linux 2.6 kernel. • Operating conditions: 0°C to 5 0°C(32°F
to 1 22°F). • Approvals: CE, FCC, RoHS, C-Tick. • Dimensions (HxWxD): 56 x 68
x 125 mm. •Accessories included: - Installation Guide. - CD x 1 ( includes User's
Manual ). - Power adapter: (Input: AC 100-240V , 50/60Hz,Output: DC 12V, 1A). - USB cable x
1.
2013 © GenuCam. ALL Rights Reserved. Privacy Policy | Terms of Service | Smart Home